Knowledge: Leather finish

Knowledge: Leather finish

Leather finish:The look of leather changes with the finish

Leather finishThe look of leather changes with the finish

The variation of leather is not limited to the difference in the animals used as raw materials.
The look will be completely different depending on the method of tanning and finishing.
The original texture of the material and the texture of the processed material further expand the enjoyment of leather.

Embossing

A method of making irregularities on the surface of leather with a high-temperature and high-pressure press. Unlike natural wrinkles, you can freely transfer your favorite patterns. Used for shoes, bags, cases, clothing, etc.

Nubuck

Unlike suede and velor, nubuck leather is brushed on the grain side. Since the delicate grain surface is treated, the slight nap of short fibers is very fine and you can enjoy the delicate texture.

Vegetable tanned leather

Also called "bare finish", the vegetable tanned leather is undyed. The color ranges from off-white to light beige. In a broader categorization, it may include dyed bare finished products.

Oil leather

Reinforced leather with water repellency and toughness given by wax and oil. Oil leather is one of them, and it is made water resistant and flexible by adding a large amount of oil to the leather.

Corrected grain leather

After chrome tanning, it is attached to a glass plate or enamel plate and dried, the grain surface is sanded, and resin is sprayed to smooth the surface. Adult cow leather is often used.

Suede

Leather with a short brushed finish made by sanding the split grain surface, which is the back side of the leather, with sandpaper. Mainly made from calf and goat leather. Among them, silky suede is
prized as a luxury item.

Boarded leather

Leather that has been textured by rubbing the grain of the leather with your hands or a machine. Depending on the direction of boarding, it is called "willow grain leather", "box grain leather", "scotch grain leather", etc.

Patent leather

Leather that has a strong glossy film on the surface of the leather by repeatedly applying linseed oil or varnish to the grain surface and drying it. Currently, urethane resin may be used to create the glossy film.

Velor

Like suede, the split grain surface is sanded, but the nap of the fibers is longer. Most of the raw hides used are those of large animals with coarse fibers such as adult cows.

Shrink

The grain surface of the leather is shrunk by heat or chemicals during the tanning process to create artificial grains. When it shrinks, it becomes softer, and the grains make the scratches less noticeable.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.