Knowledge: Tanning

Knowledge: Tanning

Tanning:The process of changing from hides to leather

TanningThe process of changing from hides to leather

The left side of the character ‘鞣し’ (tanning), is the character meaning ‘leather’ and right is the character meaning ‘soft’ .
As the characters suggest, tanning refers to processing the raw hide so that it can be used as a material.
This time, we asked Mr. Kazuya Shioda of Sanyo to guide us through the tanning process.

Hides become leather through a process called tanning. A tanning agent is bound to the collagen fibers of the skin to make it a supple leather material. Most of the raw leather of leather products is imported from overseas, but there are many tanners in Japan that perform tanning. Currently, there are two main tanning methods: vegetable tanning, which is a plant-derived ingredient, and chrome tanning, which is basic sulfuric acid. The quality of leather changes greatly depending on the composition of the chemicals used for the tanning agent.
The overall tanning process is basically the same for all tanners, but there are some differences that lead to originality.

For example, Sanyo, who we talked to, splits the back of the leather after the tanning process is completed. Mr. Shioda says, "This is more efficient because it has a larger floor surface."
In recent years, there have been an increasing number of cases where creators and designers go directly to tanner to place orders, and tanners plan and create their own products. Each has their own recipe, and tanning that brings leather to life with the technique that has been accumulated so far. It's worth knowing their outstanding technique.

Chrome tanning

Tanning using basic chromium sulfate as a tanning agent. Compared to tannins, it can be tanned in a short period of time. Has good color development, excellent elasticity and water resistance. In addition, it is soft and easy to process. Most of the leather used for clothing is chrome-tanned.

Vegetable tanning

A method of tanning using the astringency of plants, which has been practiced since ancient times. In some cases, it may take several weeks to complete the entire process. The finish is robust and is often used for men's bags. It absorbs dyes well, but the colored leather of the tannin itself is also aesthetically beautiful.

1. Preparation

[Raw hides〜Liming]

Most of the raw hide is imported from overseas. It comes in salted to prevent spoilage. Before tanning, wash with a drum to remove salt and dirt and moisturize. After rehydrating, loosen the fibers with lime. To improve work efficiency, large hides are cut in half along the spine during the preparatory stage.

2. Tanning

[Tanning〜dyeing / greasing]

When the preparation is complete, it's finally time for the tanning process. The tanning agent penetrates the skin to give it heat resistance and durability. There are two methods of tanning, one is to use a drum and the other is to soak in a pit. After tanning, wash away excess chemicals. Dye and add fat as needed. Subsequent processing depends on the finish.

3. Post-processing

[Setting〜Dry]

Use a setter to remove excess water and at the same time stretch the shrinkage in the previous process. After drying by various methods depending on the leather, give appropriate moisture to knead and loosen it to give it flexibility and elasticity. In the case of brushed leather, a process called grain correcting is necessary.

4. Finishing

[Dyeing〜Inspection / Shipping]

There are two methods of dyeing, one is to soak in dye and the other is to spray pigment with a spray. Dyeing adds durability and water repellency to leather. After dyeing, the final finish. Use a machine to gloss the surface of the leather and iron it to make it more beautiful. If necessary, embossing is also performed, and finally the product is inspected and shipped.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.